Computer and Information Science
Design of the Wide-view Collimator Based on ZEMAX
Abstract
As for the optical measurement, the longer the focal length of collimator is, the less the measurement error is. However, the longer the focal length is, the more difficult the optical design is. It’s higher application value to design long focal length collimator with wide-view. The paper designs a collimator with 2000mm focal length, 4 degree field of view and its wavelength range is from 480nm to 750nm. The collimator is employed in the camera resolution detection system. It adopts the apochromatism three-piece-type structure and the secondary spectrum is corrected. The paper analyses the imaging quality of the optical system and the MTF curve is presented.
This work is licensed under a Creative Commons Attribution 3.0 License.
Computer and Information Science ISSN 1913-8989 (Print) ISSN 1913-8997 (Online)
Copyright © Canadian Center of Science and Education
To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.