Vol 3, No 1 (2013)

Mechanical Engineering Research, Vol. 3, No. 1, June 2013

Table of Contents


Fluid Flow Investigation through Small Turbodrill for Optimal Performance PDF
Amir Mokaramian, Vamegh Rasouli, Gary Cavanough p1
Natural Convection and Radiation Heat Loss from Open Cavities of Different Shapes and Sizes Used with Dish Concentrator PDF
R. D. Jilte, S. B. Kedare, J. K. Nayak p25
Bridge Concept Design Using Heuristic Fuzzy Optimum Design and FEM PDF
Heikki Martikka, Erkki Taitokari p44
Intensity Analysis of Pretightening Bolt of Turntable Bearing PDF
Hongbin Liu, Jun Feng, Guoxi Xing, Shuai Zhang, Lei Zhang, Yujun Xue p68
Thermo-Mechanical Characterization of Laser Weld 316L(N) Stainless Steel PDF
D. Harish Kumar, A. Somi Reddy, P. Parameswaran, T. Jaya Kumar, M. Nandagopal, K. Laha, Panneer Selvi, T. Sakthivel, K. Gururaj, G. Padmanabhan p77
Effects of Surface Tension and General Rotation on the Rayleigh-Taylor Instability of Three-Layer Flow PDF
G. A. Hoshoudy p87
Probabilistic Design with Gerber Fatigue Model PDF
Edward E. Osakue p99
Performance Analysis of a Helical Savonius Rotor with Shaft at 45° Twist Angle Using CFD PDF
Rajat Gupta, Bachu Deb, R. D. Misra p118
Development of Underactuated Prosthetic Fingers with Joint Locking and Electromyographic Control PDF
Bart Peerdeman, Stefano Stramigioli, Edsko E. G. Hekman, Dannis M. Brouwer, Sarthak Misra p130
Fuzzy-Based Adaptive Cruise Controller with Collision Avoidance and Warning System PDF
Wafa Batayneh, Omar Al-Araidah, Khaled Bataineh, Adnan Al-Ghasem p143
Reduction of Wingtip Vortex from Suction at Wingtip PDF
Sangram Keshari Samal, P. K. Dash p152
Dynamical Bayesian Significance Testing for Information on Performance Variation of Rolling Bearing for Space Applications PDF
Xintao Xia, Jiaqi Zhu p163
Design analysis of Hub, Rim and Drum in Brake Assembly PDF
Ramamurti V., Sukumar T., Mithun S., Prabhakar N., Hudson P. V. p170
Failure Dependence Analysis of Shear Walls with Different Openings under Fortification Earthquakes PDF
Junfeng Zhu, Donghui Zheng, Yifan Li p185

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Mechanical Engineering Research   ISSN 1927-0607 (Print)   ISSN 1927-0615 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.


lockss_logo_2_120 images_120. proquest_logo_120