Mechanical Engineering Research, Vol. 2, No. 2, December 2012
Table of Contents
Articles
| In-piping Magnetic Actuator Capable of Inspection in a Thin Complex Pipe | |
| Hiroyuki Yaguchi, Kazushige Kamata | p1 |
| Crack Detection in Shafts Using Mechanical Impedance Measurements | |
| Abdualhakim Ahmed Tlaisi, Arisi S. Swamidas, Ayhan Akinturk, Mahmoud R Haddara | p10 |
| Design of Perforated Shell Dryings Drums | |
| Heikki Martikka, Erkki Taitokari | p31 |
| The Research of New Type Hydraulic Breaker with Strike Energy and Frequency of Adjusted | |
| Guoping Yang, Yubao Chen | p45 |
| Crack Detection in Shaft Using Lateral and Torsional Vibration Measurements and Analyses | |
| Abdualhakim Ahmed Tlaisi, Ayhan Akinturk, Arisi S. Swamidas, Mahmoud R. Haddara | p52 |
| The Calculations of Evolving Rates Realized with Two of Type Variables in Whole Process for Elastic-Plastic Materials Behaviors under Unsymmetrical Cycle | |
| Yangui Yu | p77 |
| Bifurcation Onset Delay in Magnetic Bearing Systems with Auxiliary Bearing and Time Varying Stiffness | |
| M. R. Ghazavi, Q. Sun | p88 |
| Simulation and Parametric Analysis of Cryogenic Oxygen Plant for Biomass Gasification | |
| Vaijanath N Raibhole, S N Sapali | p97 |
| Grey Prediction on Rolling Bearing Friction Torque | |
| Xintao Xia, Tao Ma | p108 |
| Surface Grinding Machine Stability Characteristics Limited Prediction | |
| Yuting Yang, Jianzhong Lin, Shilong Xu | p114 |
| Failure Dependence of High-Rise Frame Shear-Wall Structures under Frequently Occurred Earthquakes and Its Application | |
| Junfeng Zhu, Yifan Li, Qun Mei | p120 |
This work is licensed under a Creative Commons Attribution 3.0 License.
Mechanical Engineering Research ISSN 1927-0607 (Print) ISSN 1927-0615 (Online)
Copyright © Canadian Center of Science and Education
To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.
------------------------------------------------------------------------------------------------------------------------------
Mechanical Engineering Research




