A Power Saving Hybrid Technique for IoT

  •  Sadeq Al-Hamouz    


Most IoT applications usually contain a battery inside, which provides good mobility for the system, but also limits lifetime of the application in general. A lot of work concentrated on power saving algorithms for software, and hardware solutions to provide better results. The proposed solution uses a hybrid technique that enables the IoT system to save power by installing a secondary low current microcontroller to put sensorsand other devices in sleep mode, and depending on the IoT device’s application, it will be awakened by a needed trigger that is tuned according to the application (such as certain sensors readings, or time based trigger). This will provide high system flexibility.

This work is licensed under a Creative Commons Attribution 4.0 License.
  • ISSN(Print): 1913-1844
  • ISSN(Online): 1913-1852
  • Started: 2007
  • Frequency: bimonthly

Journal Metrics

(The data was calculated based on Google Scholar Citations)

h-index (January 2018): 30

i10-index (January 2018): 163

h5-index (January 2018): 19

h5-median(January 2018): 25