Application of Coagulation +Hydrolytic acidification+Tubular Membrane Bioreactor(MBR) System in Printing and Dyeing Wastewater Treatment

Huawei Sun, Yufeng Zhang, Zhaohui Zhang, Heng Zhao, Enhua Liu

Abstract


In the present paper, application of tubular MBR process in printing and dyeing wastewater treatment was investigated. Results showed that polyaluminium chloride(PAC) was the best coagulant; When MLSS=8g/L and HRT= 8h, removal of COD and chroma was 82% and 80% in tubular MBR, respectively. Removal of organic pollutants mainly depended on biological degradation, and retention of membrane just enhanced the removal efficiency of MBR. Effects of sludge concentration on the overall attenuation of membrane flux was little, but on the initial flux was evident.


Full Text: PDF

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Modern Applied Science   ISSN 1913-1844 (Print)   ISSN 1913-1852 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.