Design for Manufacturing of an Aluminum Superplastic AA5083 Alloy Plate-Fin Heat Exchanger


  •  Nuha Juneidi    
  •  Rania Asha    
  •  Firas Jarrar    
  •  Fahrettin Ozturk    

Abstract

Compact, lightweight, strong, and corrosion-resistant heat exchangers are required for many applications. In heat exchangers, plate-fin exchangers design with corrugated fins of triangular cross-sections provide high heat transfer surface area to volume ratio. This study focuses on the design for manufacturing of an aluminum AA5083 alloy plate-fin heat exchanger. The superplastic forming method is considered for the fabrication of the heat exchanger. A two-dimensional plane strain finite element model is used to study the effect of the triangular fins’ aspect ratio on the thickness distribution and the required gas forming pressure cycles. The simulation results show that the thinning in deep channels can be improved by increasing the coefficient of friction but only up to a certain limit. In addition, increasing the coefficient of friction reduces the required applied pressure on the sheet and increases the forming time. The present effort represents a necessary step toward the design of sophisticated corrugated triangular fin surfaces considering both performance and manufacturability.



This work is licensed under a Creative Commons Attribution 4.0 License.
  • ISSN(Print): 1927-0585
  • ISSN(Online): 1927-0593
  • Started: 2012
  • Frequency: semiannual

Journal Metrics

Impact Factor 2022 (by WJCI):  0.583

Google-based Impact Factor (2021): 0.52
h-index (December 2021): 22
i10-index (December 2021): 74
h5-index (December 2021): N/A
h5-median (December 2021): N/A

Learn more

Contact