Piezoresistivity and Mechanical Behavior of Metal-polymer Composites under Uniaxial Pressure

Majid Kazemian Abyaneh, Satish Ekar, Sulabha K. Kulkarni

Abstract


The piezoresistive response of copper and nickel particles reinforced polydimethylsiloxane (PDMS) polymer, forming metal-polymer composites were investigated under uniaxial pressure. Electrical and mechanical properties of composite samples containing Cu and Ni conductive fillers at different loadings in polydimethylsiloxane (PDMS) polymer matrix have been presented here. Well-dispersed metal-polymer composites were fabricated by a wet mixing route. The resulting Cu-PDMS and Ni-PDMS composite samples show the resistivity changes by more than 2 and 10 orders of magnitude around 4MPa pressure, respectively. The mechanical tests have shown that these composite samples have high stress sensitivity which makes them good piezoresistive candidates for practical applications.


Full Text: PDF DOI: 10.5539/jmsr.v1n3p50

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Journal of Materials Science Research   ISSN 1927-0585 (Print)   ISSN 1927-0593 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.

------------------------------------------------------------------------------------------------------------------------------

images_120. proquest_logo_120 doaj_logo_new_120