Fabrication and Characterization of CuO-based Solar Cells

Hiroki Kidowaki, Takeo Oku, Tsuyoshi Akiyama, Atsushi Suzuki, Balachandran Jeyadevan, Jhon Cuya

Abstract


Cuprous oxide (CuO)-based solar cells with fullerene (C60) were fabricated on indium tin oxide (ITO) by a spin-coating method. The microstructure and cell performance of the solar cells with the CuO/C60 structure was investigated. A photovoltaic device based on an ITO/CuO/C60 hererojunction structure fabricated by the spin-coating method provided short-circuit current density of 0.18 mAcm-2 and open circuit voltage of 0.04 V under illumination. The crystal structure of the CuO active layer was examined by using X-ray diffraction. The energy levels of the present solar cells are also discussed.

Full Text: PDF DOI: 10.5539/jmsr.v1n1p138

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Journal of Materials Science Research   ISSN 1927-0585 (Print)   ISSN 1927-0593 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.

------------------------------------------------------------------------------------------------------------------------------

images_120. proquest_logo_120 doaj_logo_new_120