Petrophysical Parameters Estimation Using Geophysical Well Log Data of Indus Sub-Basin Area, Pakistan

Nasir Khan, Zhu Pei Min, Ahmed Amara Konaté

Abstract


The purpose of this paper is to estimate the petrophysical parameters based on geophysical well data to identify hydrocarbon bearing zones in the Indus sub-basin’s area’s Sembar formation. The logging data gamma ray, spontaneous potential, resistivity, neutron and density have been utilized. The Archie’s equation was used to estimate petrophysical parameters. The findings have shown five main prospective zones having good porosity and high movable hydrocarbon saturation. All the reservoir zones have low bulk density and shale volume was comprised between 4.1 to 5 %.


Full Text: PDF DOI: 10.5539/jgg.v5n4p71

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Journal of Geography and Geology   ISSN 1916-9779 (Print)   ISSN 1916-9787 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.