Study on Fault Diagnosis of Fuel Injection Based on Vibration Signal Analysis of High-pressure Fuel Injection Pipe


  •  Zhiqiang Wang    

Abstract

An accurate fuel injection advance angle is an important parameter to obtain better fuel combustion index and emission
index. Fuel injection advance angle is always deranged because of the wear of the injection nozzle matching parts,
which has serious impact on diesel engine performance. How to measure the fuel injection advance angle easily and
accurately is a problem for fault diagnosis of high-pressure fuel injection pipe. In this paper, the vibration signals of
high-pressure fuel injection pipes’ nozzle of different cylinders with different fuel injection advance angles were
measured by external oil pressure sensor. Through the theoretical analyzing and calculating the above-mentioned
experimental data, the characteristic curves were established, which described the relationship between the fuel
injection advance angles and the vibration characteristic quantities of high-pressure fuel injection pipes’ nozzle. The
characteristic curves were the judgment basis of fuel injection system fault diagnosis. It can be applied to diagnose the
fault that caused by fuel injection advance angle change which induced by improper adjustment and matching parts
abrasion.


This work is licensed under a Creative Commons Attribution 4.0 License.
  • ISSN(Print): 1916-9639
  • ISSN(Online): 1916-9647
  • Started: 2009
  • Frequency: semiannual

Journal Metrics

Google-based Impact Factor (2017): 3.90
h-index (November 2017): 17
i10-index (November 2017): 33
h5-index (November 2017): 12
h5-median (November 2017): 19

Learn more

Contact