The Usage of the Microwave Crack Detector for Fatigue Cracks Detection

Sutorikhin V. A.

Abstract


The work includes the description of fatigue cracks testing. The first tests were carried out with the help of microwave crack detector using the ultrasonic sound. The tests results proved the expectation. The equipment set “Remote Indicators Active Defects-2” (also RIAD-2) allows to perform remote detection of the active defects, occurring in the metal parts of the samples after cycle testing. The aftereffect with the duration time starting from several minutes and up to several hours was pinpointed for the first time. The successful results were achieved in the reactivation of inactive defects.


Full Text: PDF DOI: 10.5539/apr.v5n5p60

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Applied Physics Research   ISSN 1916-9639 (Print)   ISSN 1916-9647 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.

doaj_logo_new_120 images_120. proquest_logo_120 lockss_logo_2_120 udl_120.